BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 35 of 58
13.3
Joining Aeration units to the network
If an aeration unit and Base unit are not displaying the same wireless network
colour around their wireless buttons then the aeration unit is not on the same
wireless network. The colour around the wireless button on the Base unit will be
the same colour as the light on the lectern’s grey panel. The number of aeration
units on the network can be read from the screen.
The following explains how to join an aeration unit to the wireless network. The
base unit and lectern have to already be paired.
Press the ‘Open Network’ button. The
button will start to flash.
Then press the wireless button on the
portable aerator and its light will start
to fast flash.
After a short time the button on the
aerator will stop flashing and become
the same colour as the Base unit.
The number of aerators displayed on
the screen will increase accordingly.
Several aerators can be paired at the
same time. A maximum of 6 aerators is
allowed. The network can then be
closed by pressing the ‘open network’
button again, if this is not done it will
close automatically after 5 minutes.
