BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 38 of 58
filter panels or fan grilles. Take care around the power switch(es) not to
use excessive cleaning solution.
•
Rinse cloth and wipe thoroughly.
•
Dry surfaces with a lint-free clean cloth.
14.1.3
Hydrogen Peroxide Liquid
Bioquell Hydrogen Peroxide must be used as it ensures that the national
regulations on hydrogen peroxide liquid and decontamination processes are
complied with as well as ensuring that the liquid is of a compatible quality for the
system. The bottle has been designed to reduce the risk of liquid coming in
contact with the operator.
The ProteQ base unit will take two sizes of bottles:
950ml Bottle
Part Number: BQ783-XX-0950
This part number is for four 950ml bottles of 35% hydrogen peroxide.
2Litre Bottle
Part Number: BQ783-XX-2000
This part number is for four 2litre bottles of 35% hydrogen peroxide.
(where XX refers to the country/region codes, refer to your local Bioquell office or
distributor for applicable code.)
Contact your local Distributor to order the Bioquell Hydrogen Peroxide.
Only Hydrogen Peroxide approved by Bioquell should be used with the Flexi
Adaptor.
14.2
Scheduled Maintenance
Planned and preventative maintenance and calibration must be carried out by
fully trained and Bioquell authorised service personnel on a minimum of a twelve
monthly cycle to maintain the safety and efficiency of the system operation. Only
genuine replacement parts supplied by a Bioquell Service Provider must be used
to ensure safe operation.
Do not expose the ProteQ base unit to Isopropyl Alcohol (IPA) or other
hydrocarbon cleaning agents as this will adversely affect the hydrogen
peroxide sensor
