BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 19 of 58
To remove bottles: Release the plunger as shown in STEP 1 and remove the
bottle. Ensure that both the yellow cap and the bottle’s screw cap are put back
on, even if the bottle is empty.
7.3
Fitting Insert for 950ml Bottle
When a 950ml bottle is required an insert must be placed in the bottle holder.
7.4
Flexi Adaptor
Fill the flexi adaptor with Bioquell approved Hydrogen Peroxide and place lids on
both left and right hand sides and wear eye protection and gloves as a minimum
when carrying it.
WARNING:
Always replace the yellow cap, otherwise hydrogen peroxide
liquid may build up in the top of the bottle.
Place the insert into the bottle holder, ensuring it
is all the way down. It is possible to have a mix
of size of bottles if required.
Remove cap on left hand side and place into
the bottle carrier in the orientation shown,
shut and push plunger down as described in
section 7.2.
