BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 37 of 58
14
ROUTINE MAINTENANCE
14.1
User Routine Maintenance
14.1.1
Changing the Printer Paper
The paper required for the printer is available from Bioquell (Part No. 7050-
00003). The following pictures show how to change the printer paper:
Open the printer cover by gently lifting
the “green” part.
Allow the cover to drop down and
remove the old roll of paper.
Replace with new roll of paper ensuring
correct orientation (as shown).
Push cover closed. The printer is now
ready to use.
Depressing the
button will allow paper to be fed through the printer.
14.1.2
Cleaning
The system exterior surfaces are manufactured from polypropylene (PP),
acrylonitrile butadiene styrene (ABS), and polyester powder coated aluminium
and stainless steel panels.
To keep the unit clean the following procedure is recommended:
•
Switch off power.
•
Using a mild detergent solution (non-abrasive) wipe the external surfaces
with a damp cloth taking care not to wet the printer or the external pre-
