BIG ASS FANS BAFWorks 3.0, Installation Manual

Page: 67 / 84

BAFWORKS
®
INSTALLATION GUIDE
61
WWW.BIGASSSOLUTIONS.COM ©2013 DELTA T CORP. ALL RIGHTS RESERVED
BAFWORKS
®
INSTALLATION GUIDE
Using BAFWorks
®
(cont.)
Icon Description
Fan running, communication OK
Fan stopped, communication OK
Fan faulted, communication OK. See the fan
Installation Guide for details on fan fault messages.
Communication loss, fan status unknown
Configuring individual fan settings
To adjust the settings for a fan in the BAFWorks
®
system:
1. On the BAFWorks home screen, touch
Fans
or
All Devices
.
2. If you touched Fans , touch the name of the fan group containing the fan you want to work with.
3. Select the fan. The fan settings page appears (Figure 3).
4. Adjust the settings as necessary, and then touch Done . See Figure 3 below for details.
A. Fan Name.
Touch here to edit the fan name.
B. Group Header. Indicates the group to which the fan belongs. Touch the group header to assign the fan to a different group.
C. Fan Status. Indicates the fan’s operational status. See the table below for descriptions of each status icon.
D. Fan Power. Start or stop the fan.
E. Admin Lock. Lock or unlock the fan’s operational status. This setting requires administrator password entry.
F. Adjust Fan Speed. Drag the needle or the slider for course speed adjustments. Touch the plus (+) and minus (-) buttons for more
finite control.
G. Modbus Address. Indicates the fan’s Modbus address in the system (1–32).
Fan status icons
A
B
C
D
E
F
Figure 3–Fan settings page
G