BIG ASS FANS BAFWorks 3.0, Installation Manual

Page: 14 / 84

BAFWORKS
®
INSTALLATION GUIDE
WWW.BIGASSSOLUTIONS.COM ©2013 DELTA T CORP. ALL RIGHTS RESERVED
8 Electrical Installation: Lights, Ventilation, &
Automation
WARNING: To reduce the risk of electric shock, wiring should be performed by a qualified electrician! Incorrect assembly can
cause electric shock or electrical component damage! Hazard of electrical shock!
WARNING: Installation must be in accordance with the requirements specified in this installation manual and with any
additional requirements set forth by the National Electric Code (NEC), ANSI/NFPA 70-2011, and all local codes. Code
compliance is ultimately YOUR responsibility! Failure to comply with these codes could result in personal injury or property
damage.
CAUTION: The Big Ass Solutions product warranty will not cover equipment damage or failure that is caused by improper
installation.
CAUTION: The following information is merely a guide for proper installation. Big Ass Solutions cannot assume
responsibility for the compliance or the non-compliance to any code, national, local, or otherwise for the proper installation of
this equipment. A hazard of personal injury and/or equipment damage exists if codes are ignored during installation.
ADAM module basic power and data wiring
In from router
or switch
DC supply rating:
In: 100–277 VAC 50/60 Hz
Out: 24 VDC @ 30 W
ADAM module power consumption: 10–30 VDC, 3.5 W each
ADAM module environmental ratings: 14ºF–158ºF (-10ºC–70ºC), 20–95% RH non-condensing
RED BLACK
100 m
330 ft
Complete all steps in “Pre-Installation Requirements” on page 5 and ensure that you have read "Installation Overview"
on page 7 before proceeding.
The maximum cable distance allowed between any two devices is 100 m (330 ft).