BIG ASS FANS BAFWorks 3.0, Installation Manual

Page: 57 / 84

BAFWORKS
®
INSTALLATION GUIDE
51
WWW.BIGASSSOLUTIONS.COM ©2013 DELTA T CORP. ALL RIGHTS RESERVED
BAFWORKS
®
INSTALLATION GUIDE
Adding and deleting lights and light groups
Each light in the BAFWorks
®
system must belong to a group. The application starts with a default group called “Lights.” You can add
lights to this group or create new groups.
To add a light to a group:
1. If necessary, open BAFWorks.
2. On the BAFWorks home screen, touch Lights .
3. Touch the name of the light group to which you want to add the light.
4. In the top left corner of the screen, touch Edit .
5. Enter the admin lock password, and then touch OK . Note: The default admin lock password is 1271. See page 55 for instructions on
changing the password.
6. At the top of the screen, touch Add .
7. In the Add Light dialog box (Figure 11), enter a name for the light, and then select the output module and port number that the light
is connected to. Ensure all output module and port number information is recorded on page 58 of this manual and on page 28 of the
BAFWorks User Guide.
8. Touch Save , and then touch Exit in the top left corner of the screen. The new light appears on the light group screen.
See below for instructions on deleting lights. See the following page for instructions on adding and deleting light groups.
Figure 11–Add Light dialog box
Deleting lights
To delete a light:
1. On the BAFWorks home screen, touch Lights .
2. Touch the name of the light group containing the light you want to delete.
3. In the top left corner of the screen, touch Edit .
4. Enter the admin lock password, and then touch
OK
. Note: The default admin lock password is 1271. See page 55 for instructions on
changing the password.
5. Touch the X icon(s) next to the light(s) you want to delete (Figure 12).
6. In the top left corner of the screen, touch Exit .
Figure 12–Deleting lights
Setting Up the BAFWorks
®
Application (cont.)