BIG ASS FANS BAFWorks 3.0, Installation Manual

Page: 59 / 84

BAFWORKS
®
INSTALLATION GUIDE
53
WWW.BIGASSSOLUTIONS.COM ©2013 DELTA T CORP. ALL RIGHTS RESERVED
BAFWORKS
®
INSTALLATION GUIDE
Adding and deleting louvers/vents and louver/vent groups
Each louver and vent in the BAFWorks
®
system must belong to a group. The application starts with default groups called “Louvers” and
“Ventilation.” You can add louvers and vents to these groups or create new groups.
To add a louver or vent to a group:
1. If necessary, open BAFWorks.
2. On the BAFWorks home screen, touch Ventilation .
3. Touch the name of the louver or ventilation group to which you want to add the louver or vent.
4. In the top left corner of the screen, touch Edit .
5. Enter the admin lock password, and then touch OK . Note: The default admin lock password is 1271. See page 55 for instructions on
changing the password.
6. At the top of the screen, touch Add .
7. In the Add Louver or Add Ventilation dialog box (Figure 14), enter a name for the louver or vent, and then select the output module
and port number that the louver/vent is connected to. Ensure all output module and port number information is recorded on page 58
of this manual and on page 28 of the BAFWorks User Guide.
8. Touch Save , and then touch Exit in the top left corner of the screen. The new louver or vent appears on the louver or ventilation
group screen.
See below for instructions on deleting louvers and vents. See the following page for instructions on adding and deleting louver/vent
groups.
Figure 14–Add Louver and Add Ventilation dialog boxes
Deleting louvers and vents
To delete a louver or vent:
1. On the BAFWorks home screen, touch Ventilation .
2. Touch the name of the group containing the louver or vent you want to delete.
3. In the top left corner of the screen, touch
Edit
.
4. Enter the admin lock password, and then touch OK . Note: The default admin lock password is 1271. See page 55 for instructions on
changing the password.
5. Touch the X icon(s) next to the louver(s) or vent(s) you want to delete (Figures 15 and 16).
6. In the top left corner of the screen, touch Exit .
Figure 15–Deleting louvers
Figure 16–Deleting vents
Setting Up the BAFWorks
®
Application (cont.)