BENSHAW Rsi S Series, Instruction Manual, Page: 56 / 398

Learning Advanced Features
44
As an example, if Ad.24 (Frequency Limit) is set to 0 (No), the next codes, Ad.25 (Freq Limit Lo) and
Ad.26 (Freq Limit Hi), will not be displayed. If you set code Ad.24 to 1 (Yes), this enables the frequency
limit features, codes Ad.25 and 26 will appear to allow the maximum and minimum frequency
limitations to be set up.
Navigating Directly to Different Codes
The following example details navigating to code dr. 95, from the initial code in the Drive group (dr.
0). This example applies to all groups whenever you would like to navigate to a specific code
number.
Step Instruction Keypad Display
1
Ensure that you are currently at the first code of the Drive group
(dr.0).
2
Press the [ENT] key.
Number ‘9’ will flash. (default setting)
3
Press the [
▼
] key to display
‘
5,
’
in the ones position.
4
Press the [
◀
] key to move to the tens position.
The cursor will move to the left and ‘05’ will be displayed. This
time the number ‘0’ will be flashing.
5
Press the [
▲
] key to increase the number from
‘
0
’
to
‘
9,
’
in
the tens position .
6
Press the [ENT] key.
Code dr.95 is displayed.
DR.95
DR. 8
DR. 2
DR. 0
‘9’
‘5’
‘0’5
‘9’5
dr.95
dr.0