BENSHAW Rsi S Series, Instruction Manual, Page: 53 / 398

Learning Advanced Features
41
Operation Keys
The following table lists the names and functions of the keypad’s operation keys.
Install a separate emergency stop switch in the circuit. The [STOP/RESET] key on the keypad works
only when the inverter has been configured to accept an input from the keypad.
Key Name Description
[RUN] key Used to run the inverter (inputs a RUN command).
[STOP/RESET] key
STOP: stops the inverter.
RESET: resets the inverter following fault or failure condition.
,
[
▲
] key, [
▼
] key
Switch between codes, or to increase or decrease parameter
values.
,
[
◀
] key, [
▶
] key
Switch between groups, or to move the cursor during
parameter setup or modification.
[ENT] key Used to select, confirm, or save a parameter value.
[ESC] key
A multi-function key used to configure different functions, such as:
•
Jog operation
•
Remote/Local mode switching
•
Cancellation of an input during parameter setup
RUN
STOP
RESET
ENT
ESC