BENSHAW Rsi S Series, Instruction Manual, Page: 32 / 398

Installing the Inverter
20
2 Push and hold the levers on both sides of the cable guide (
❶
) and then remove the cable guide
by pulling it directly away from the front of the inverter (
❷
). In some models where the cable
guide is secured by a bolt, remove the bolt first.
3 Push and hold the tab on the right side of the control terminal cover. Then remove the cover by
lifting it from the bottom and moving it away from the front of the inverter.
4 Connect the cables to the power terminals and the control terminals. For cable specifications,
refer to 1.5
Cable Selection .