BENSHAW Rsi S Series, Instruction Manual, Page: 117 / 398

Learning Advanced Features
105
Code Description
LCD keypad
P2P Setting
The P2P function is used to share input and output devices between multiple inverters. To enable
P2P setting, RS-485 communication must be turned on .
Inverters connected through P2P communication are designated as either a master or slaves . The
Master inverter controls the input and output of slave inverters. Slave inverters provide input and
output actions. When using the multi-function output, a slave inverter can select to use either the
master inverter’s output or its own output. When using P2P communication, first designate the
slave inverter and then the master inverter. If the master inverter is designated first, connected
inverters may interpret the condition as a loss of communication.
Master Parameter
Group Code Name
LCD
Display Parameter
Setting Setting
Range
Unit
CM 95
P2P Communication
selection Int 485
Func
1 P2P Master 0
–
3
-
US
80 Analog input1 P2P In V1 0
0
–
12,000
%
81 Analog input2 P2P In I2 0
-12,000
–
12,000
%
82 Digital input P2P In DI 0 0
–
0x7F bit
85 Analog output
P2P Out
AO1
0 0
–
10,000 %
88 Digital output
P2P Out
DO
0
0
–
0x03
bit
Slave Parameter
Group Code Name LCD Display Parameter Setting Setting Range Unit
CM
95
P2P
Communication
selection
Int 485
Func
2 P2P Slave
0
–
3
-
96
P2P DO setting
selection P2P OUT
Sel
0 No 0
–
2 bit
P2P Setting Details
Code Description
CM.95 Int 485 Func
Set master inverter to 1(P2P Master), slave inverter
to 2(P2P Slave).
US.80–82 P2P Input Data Input data sent from the slave inverter.