BENSHAW Rsi S Series, Instruction Manual, Page: 241 / 398

229
Learning Protection Features
Fault/Warning List
The following list shows the types of faults and warnings that can occur while using the ”S” Series
inverter. Please refer to 6
Trips and Warnings
for details about faults and warnings.
Category LCD Display Details
Major fault Latch type Over Current1 Over current trip
Over Voltage Over voltage trip
External Trip Trip due to an external
signal
NTC Open Temperature sensor
fault
Over Current2 ARM short current
fault
Option Trip-x* Option fault*
Over Heat Over heat fault
Out Phase Open Output open-phase
fault
In Phase Open Input open-phase fault
Inverter OLT Inverter overload fault
trip
Ground Trip Ground fault
Fan Trip Fan fault
E-Thermal Motor overheat fault
trip
Pre-PID Fail Pre-PID operation
failure
IO Board Trip IO Board connection
fault
Ext-Brake External brake fault
No Motor Trip No motor fault
Low Voltage 2 Low voltage fault
during operation
ParaWrite Trip** Write parameter fault
Level type Low Voltage Low voltage fault
BX Emergency stop fault
Lost Command Command loss trip
Safety A(B) Err Safety A(B) contact
trip
Hardware damage EEP Err External memory error