BENSHAW Rsi S Series, Instruction Manual, Page: 210 / 398

Learning Advanced Features
198
Analog Pulse Output
Select 1 of 15 functions with parameter OU.01, Analog Output1 to be represented by the pulsed
output. Note the Q1 terminal must be set to TO, Pulse Output.
G
r
o
u
p
Code Name LCD Display Parameter Setting Setting Range Unit
O
U
33 Multi-function output 1 Q1 define 39 TO 0–38 -
61 Pulse output setting TO Mode 0 Frequency 0–15 -
62 Pulse output gain TO Gain 100.0 -1000.0–1000.0 %
63 Pulse output bias TO Bias 0.0 -100.0-100.0 %
64 Pulse output filter TO Filter 5 0–10000 ms
65
Pulse output constant
output2
TO Const % 0.0 0.0-100.0 %
66 Pulse output monitor TO Monitor 0.0 0.0–1000.0 %
Analog Pulse Output Setting Details
Code Description
OU.33 Q1 Define
In case of Standard I/O, pulse output TO and multi-function output Q1 share
the same terminal. Set OU.33 to TO which represents a 32kHz pulse output
and follow the instructions below to make wiring connections that configure
the open collector output circuit.
1. Connect a 1/4W, 560
Ω
resistor between VR and Q1 terminals.
2. Connect EG and CM terminals.
When wiring the resistor, a resistance of 560
Ω
or less is recommended to
stably provide 32kHz pulse output.