BENSHAW Rsi S Series, Instruction Manual, Page: 211 / 398

Learning Advanced Features
199
Code Description
When connecting a pulse output to another inverter, connect pulse output
(Q1-EG) to pulse input(P5-CM) directly without resistor and wire.
• Standard I/O <-> Standard I/O : Connect to Q1 -> P5, EG -> CM
OU.62 TO Gain,
OU.63 TO Bias
Adjusts output values (gain and bias). If frequency is selected as an output
(OU.61=0), it will operate as shown below.
.$ (01 =
%&
'(%
× .$ )* + .$ ,*-
The following graph illustrates that the pulse output (TO/ Q1) changes
depending on OU.62 (TO Gain) and OU.63 (TO Bias) values. The Y-axis is an
analog output frequency (0
–
32kHz) and the X-axis is a % of the output
frequency.
For example, if the maximum frequency set with dr.20 (Max Freq) is 60Hz and
actual output frequency is 30Hz (Y-axis at 16kHz.), then the x-axis value on the
first graph is 50%.
1/4W 560Ω