BENSHAW Rsi S Series, Instruction Manual, Page: 249 / 398

RS-485 Communication Features
237
retains all the existing values even after the power has been turned off.
Setting address 0h03E0 to 0 and then setting it again to 1 via communication allows the existing
parameter settings to be saved. However, setting address 0h03E0 to 1 and then setting it to 0 does
not carry out the same function. Parameters defined by communication can only be saved using an
LCD keypad.
Group Code Name LCD Display Parameter
Setting Setting
range Unit
CNF* 48 Save parameters Parameter
Save 0 No 0 -1 -
1 Yes
*Available on an LCD keypad only.
Total Memory Map for Communication
Communication Area Memory Map Details
Communication common compatible
area 0h0000-
0h00FF Benshaw S Series, SG, GX compatible
area
Parameter registration type area 0h0100-
0h01FF Areas registered at CM.31–38 and
CM.51–58
0h0200-
0h023F Area registered for User Group
0h0240-
0h027F Area registered for Macro Group
0h0280-
0h02FF Reserved
Communication common area 0h0300-0h037F Inverter monitoring area
0h0380-
0h03DF
Inverter control area
0h03E0-
0h03FF Inverter memory control area
0h0400-
0h0FFF Reserved
0h1100 dr Group
0h1200 bA Group
0h1300 Ad Group
0h1400 Cn Group
0h1500 In Group
0h1600 OU Group
0h1700 CM Group
0h1800 AP Group
0h1B00 Pr Group
0h1C00 M2 Group