Benelli 2014 BN600, Service Manual

Page: 41 / 243

CHK
ADJ
- 40 -
PERIODIC MAINTENANCE AND LUBRICATION INTERVALS
Intervals given in the scheduled maintenance table must be considered as a general guideline for conditions of normal use only.
It may be necessary to reduce these intervals according to weather conditions, terrain, geographical situation and individual use.
Some operations can be performed by the user as long as they have the necessary skills and in any case, as long as this is ex-
pressly mentioned in this manual.
In any case, carry out operations at an authorised Benelli workshop. A list of workshops is available on our website www.benelli.
com or from our customer service (T_ +39 0721 41871).
In general, maintenance needs to be carried out with the motorbike on the rear stand, engine off and switch set to OFF:
While checking fl uid levels, it is preferable to keep the motorbike upright without using the rear stand.
NOTE:
• Annual checks need to be carried out every year unless maintenance is carried out on the base of servicing at set distance
intervals (or in the case of the UK, mileage).
• At 36,000 km, repeat maintenance services as begun at 12,000 km.
• For intervals for those items marked“ ”, we recommend contacting a Benelli dealer, given that it is necessary to have special
equipment, specifi c information and specifi c technical experience-
The following section shows all of the maintenance operations-
KEY
I Inspection and adjustment, cleaning, lubrication or replacement, as needed
R Replacement
T
Tighten
Dealer
NOTE:
AIR FILTER
• The air fi lter needs to be replaced more often if the vehicle is used in particularly damp or dusty environments.
HYDRAULIC BRAKE MAINTENANCE
• Check brake fl uid levels on a regular basis and top up as necessary.
• Replace the parts inside the brake pump and callipers every two years. Also change the brake fl uid.
• Replace brake hoses every 4 years, or before if cracked or damaged.