Benelli 2014 BN600, Service Manual, Page: 123 / 243

- 122 -
CHAS
FRONT FORK
FRONT FORK STEM FITTING
The following procedure is applied to both front fork stems.
Fit:
• The front fork stems (A) Fig.A.
tighten provisionally
• The stop screws (B) on the bottom steering plate Fig. A.
NOTE
Check the assembly position “x” Fig.B, which must be identifi ed
considering the bottom section of the steering base (7) and the
end of the steering rod (excluding the dust seal shim).
Assembly position (X)
204.5 mm
Tighten:
• The stop screws (B) on the bottom steering plate to the fol-
lowing torque:
T.R.
Torque 8 N*m
NOTE
Tighten in three steps.
• Insert the top steering plate, inserting shims (Y) into the ope-
nings, so as to make it easier to insert Fig.C.
Tighten:
• The stop screws (3) on the top steering plate (9) Fig. C to the
following torque:
T.R.
Torque 22 N*m
IMPORTANT NOTICE
Check that the path of the brake hoses is correct.
A
A
B
B
X
C
Y
9
3
3
7