Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 89 / 110

89
Kaleido-IP X310/X110
Installation & Service Manual
A progress indicator appears momentarily, followed by a confirmation message.
6 Click Restart unit .
The system prompts you to confirm.
7 Click Yes to proceed.
Your multiviewer will shut down, and then start again. This may take a while.
Once the multiviewer has restarted, the system notifies you.
8 Click OK .
The XAdmin Status and Options page appears.
9 Make sure the same font is available on the client PC where you use XEdit. (To install a
font on Windows 7 or later, right-click the TTF file, and then click Install .)
10 Close XEdit and then open it again.
The new fonts are now available, if you:
• Connect XEdit to the multiviewer (see Opening XEdit in Online Mode on page 67).
• Download the database from the multiviewer to your local workspace
(see Importing a Database on page 89).
Importing a Database
To import a database
1 On the Configure menu, point to Database , and then click Import .
The Import from Multiviewer window appears, prompting you for the IP address of the
multiviewer whose database you want to import.
Your recent connections, and all the multiviewers that are on the same subnet as your
PC are automatically included in the list.
IMPORTANT
Upgrading or reinstalling the Kaleido Software removes all additional fonts
you may have uploaded to the multiviewer. In such case, you will need to
repeat this procedure.