Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 107 / 110

107
Kaleido-IP X310/X110
Installation & Service Manual
Codec support by decoding mode
KIP decoding mode
→
RTMP HLS TS RTSP ES
Stack RTMP HLS
(HTTP)
RTSP
MPEG-TS
a
Elementary stream
TCP RTP
UDP TCP UDP
Video
codec H.265 (HEVC)
• • •
H.264 (AVC)
• • • • • • • •
MPEG-4
b • • •
MPEG-2 video
c • • •
Audio
codec
d
AAC
e
LATM Optional Optional Optional Optional
AAC
e
Optional Optional Optional Optional Optional Optional Optional
AC3 Optional Optional Optional optional optional Optional
Dolby Optional Optional Optional Optional
MPEG-1 Layer 2
• • • • • •
MPEG-1 Layer 3
• • • • • • •
a. A maximum of 512 elementary streams per program is supported.
b.MPEG-4 decoding capacity is identical to H.264.
c. Including unencrypted Digicipher 2 (DCII)
d.Up to 48kHz. Some limitations apply when the sample rate is different than 48kHz.
e. LC-AAC, HE-AAC (SBR) & HE-AACv2 (SBR+PS)
Notes
• The Kaleido-IP supports streaming over wide area networks (WAN), which
are subject to packet delay variation (jitter), latency, packet reordering,
and packet loss. It also supports encoders that transmit in bursts or with
long delays between packets. The Kaleido-IP can handle transmission
delays matching the encoder’s video buffer delay, and, in the case of RTP
streams, up to ±120 ms of packet delay variation.