Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 70 / 110

70
System Configuration
Configuring Transport Streams
Adding Stream Sources
If you have connected your Kaleido-IP to more than one Data Network , or you want to
monitor sources from Unicast streams or from other types of transport streams, or more
sources from Multicast streams, then you need to add transport streams to the basic system
configuration. See
Adding a Multicast Transport Stream below, and Adding a Unicast
Transport Stream , on page 72.
Refer to Managing Transport Streams in a Kaleido-IP System Representation, in the Kaleido
Software User’s Manual (see Related Documentation , on page 15), for instructions on:
• importing transport stream configuration information, from a spreadsheet
• adding source-specific or source-filtered multicast (SSM or SFM) transport streams
• adding HLS playlists
• adding RTSP transport streams
• adding RTMP transport streams
• adding NMOS devices
Adding a Multicast Transport Stream
To add a multicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, right-click the appropriate network adapter for the
source you want to add, and then click insert Multicast .
The Multicast Stream Configuration window appears.