Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 69 / 110

69
Kaleido-IP X310/X110
Installation & Service Manual
4 In the case of an SSM (or SFM) stream, enter the IP address associated with the specific
source you want to monitor in the SSM source IP address box.
5 If the stream you want to add is constrained to a virtual LAN, enter the appropriate
VLAN identifier.
The Kaleido-IP establishes a connection with the selected stream. All programs that are
part of the stream, and the elementary streams included in these programs,
automatically appear under the transport stream element in the System list.
6 Repeat this until you have completed the required configuration changes to match the
set of transport streams you want to monitor.
7 If there are default transport streams left, which you will not use, right-click them, and
then click Remove .
8 On the File menu, click Save . Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Note:
VLAN adapter settings must have been previously configured in
XAdmin. See
Configuring Virtual Network Adapters on a Kaleido-IP
, on
page 86 for more information.