Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 68 / 110

68
System Configuration
Configuring Transport Streams
Modifying the Set of Predefined Streams
To modify settings for a multicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then navigate to the multicast transport
stream you want to configure, under NETWORK ADAPTER 2 .
The settings for the selected multicast stream appear in the Properties pane.
3 Replace the default stream name if desired, select the appropriate protocol (RTP, UDP),
and enter the multicast group IP address, and port number associated with the actual
transport stream you want to monitor.
Note:
Under the network adapter elements, transport streams are listed in
alphabetical order.
Notes
• The Kaleido Software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are: @ / \ ' and " .
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.