36
IP Network Setup
Network Considerations for a Multiviewer Cluster
Router drivers also use default ports:
Between multiviewer and SNMP managers
Between multiviewer and NTP server
The following ports, used for communications to/from Network Time Protocol servers, are
open by default on all Kaleido Multiviewer systems:
Network Considerations for a Multiviewer Cluster
Port
Driver
Transport
Notes
4000
ETL
TCP
12345
GVG 7000 Native
TCP
9193
NVEP NV9000 (NP0017)
TCP
4381
VikinX Modular
TCP
9100
Quintech
TCP
12345
Sony HKSPC
TCP
GVGNP Emulator
5001
Utah RCP-3
TCP
SC-4 Ethernet
2000
SAM (Snell/Pro-Bel) SW-P-02
TCP
14000
SAM (Snell/Pro-Bel) SW-P-08
TCP
Note:
This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.
Port
Used for
Transport Notes
161
SNMP
UDP
Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
multiviewer (e.g., sending get, get-next, and set messages
to a multiviewer’s SNMP agent, and receiving the response).
1161
UDP
Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
Kaleido-IP
multiviewer (e.g., sending get, get-next, and set
messages to a multiviewer’s SNMP agent, and receiving the
response).
Port
Used for
Transport Notes
123
NTP
TCP
Used for Network Time Protocol synchronization. Port
needs to be open in both directions.
IMPORTANT
Before changing the system name or IP address of a multiviewer
associated with a cluster, review the following.
Summary of Contents for Grass Valley KALEIDO-IP X110
