Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 71 / 110

71
Kaleido-IP X310/X110
Installation & Service Manual
3 In Multicast Stream Configuration , replace the default stream name if desired, select
the appropriate protocol (RTP, UDP), and type the multicast group address and port
number associated with the transport stream you want to add.
4 If the stream you want to add is constrained to a virtual LAN, select Virtual LAN
tagging , and then type the appropriate VLAN identifier.
5 Click OK .
Notes
• The Kaleido Software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are:
@ / \ '
and
"
.
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.
Note:
VLAN adapter settings must have been previously configured in
XAdmin. See Configuring Virtual Network Adapters on a Kaleido-IP , on
page 86, for more information.