Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 35 / 110

35
Kaleido-IP X310/X110
Installation & Service Manual
Between multiviewer and remote control panel
The following ports, used for communications to/from RCP-200 and Kaleido-RCP2 control
panels, are open by default on all Kaleido Software systems:
From multiviewer to peripheral devices
From peripheral devices to multiviewer
The following ports must be open on peripheral devices (e.g., router controllers):
Port Used for Transport Notes
5120 RCP2 TCP Used to listen for Kaleido Software discovery packets
10000 TCP For RCP2 protocol
10001 TCP For RCP2 protocol
5120 UDP On multicast 230.8.8.9 for RCP2 protocol
5121 UDP For RCP2 protocol
80 HTTP TCP Used by the RCP-200 to obtain information from the
multiviewer’s system database
13000 TCP Used by the RCP-200 to control the multiviewer via the
gateway
Port Used for Transport Notes
25 SMTP TCP Simple Mail Transfer Protocol, for e-mail alerts.
8851 AlVelte TCP Used to obtain information from Plura
(AlVelte) Studio Production Timer (SPT)
systems.
5100 GPI-1501 TCP Used to obtain information from GPI-1501 General
Purpose Interface I/O modules.
i
i. See also: From multiviewer to multiviewer , on page 33.
8910
ii
ii. Configurable.
TSL (network) TCP Used to obtain information from TSL devices that use
the TSL UMD version 5.0 protocol.
Port Transport Notes
2000 TCP Used to control a multiviewer's internal router via the SAM (Snell/Pro-
Bel) SW-P-02 protocol
4381 TCP Used to control a multiviewer's internal router via the Nevion (Network)
protocol
5194 TCP Used to control a multiviewer's internal routervia the NVEP Router
(NP0016) protocol.
7600 TCP Used to control a Kaleido-IP multiviewer via a REST API
14000 TCP Used to control a multiviewer's internal router via the SAM (Snell/Pro-
Bel) SW-P-08 protocol