Belden Grass Valley KALEIDO-IP X110, Installation & Service Manual

Page: 72 / 110

72
System Configuration
Configuring Transport Streams
The Kaleido-IP establishes a connection with the selected stream. All programs that are
part of the stream, and the elementary streams included in these programs,
automatically appear under the transport stream element in the System list.
6 Repeat this procedure until you have added all required multicast transport streams to
your system configuration.
7 On the File menu, click Save . Alternatively, click the Save button on the toolbar.
Changes to the system are saved.
Adding a Unicast Transport Stream
To add a unicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, right-click the appropriate network adapter for the
source you want to add, and then click insert Unicast .
The Unicast Stream Configuration window appears.
3 In Unicast Stream Configuration , replace the default stream name if desired, select the
appropriate protocol (RTP, UDP), type the port number associated with the transport
stream you want to add, and then click
OK .
Note:
Under the network adapter elements, transport streams are listed in
alphabetical order.
Transport stream
Program 1
Elementary streams (audio)
Elementary stream (video)
Group address
Protocol
Port number (or range)
Program 2
Elementary stream (video)
Elementary streams (audio)