1.
General
These operating
instructions contain all information that are necessary for installation and
- and assembly
operation of the central lubrication system. It helps you getting familiar with the central lubrication system and its
functions and to operate it in a safe, proper and economical way.
It shall help you to avoid risks, damage and downtimes. Furthermore it increases the reliability and the
s
service life of the central lubrication system. Apply the operating instructions according to the national
regulations concerning working safety, accident prevention and environmental predection.
Keep the operating manual always at the place of operation. All people working with the central lubrication
system have to be informed of the contents of this manual, especially of the safety instructions. The operator
of the central lubrication system is responsible for the staff.
1.1
Intended use
The central lubrication system is
allowed for
.
only
industrial use
The central lubrication system may only be
, if it is integrated or attached
another
operated
to
machine and will be operated together with it. Use only lubricants according to the machine
manufacturer specification.
The central lubrication system may only be used according to the technical data (see chapter
2 „technical data“. Never exceed the indicated values. Never operate the device without
lubricant.
Unauthorized
at the central lubrication system are
.
structural changes
not permitted
We are not liable for
consequential damages of the machine or injuries of persons.
This also belongs to
:
an intended use
·
Pay attention to all notes in the operat
manual.
ing
·
Carry out all maintenance work.
·
Observe
relevant instructions
all
for the work safety and accident prevention during all life cycles of the central
lubrication system.
·
You have to have the required professional education and authorization of your company, to carry out the
necessary works at the central lubrication system.
Another use or a use beyond can not be considered to be an intended use.
1.2
Scope of guarantee
The manufacturer g
ional
performance
uarantees
operat
safety, reliability and
, only under the following
conditions
:
and in regards to the intended use
·
A
out by authorized and qualified staff
ssembly, installation, connection and maintenance are only carried
.
·
The customer has to cover hazardous parts (e.g. heated or moving parts).
·
The central lubrication system is installed and operated according to the operating- and assembly
instructions.
·
The mentioned technical data must not be exceed
in any case.
ed
·
Retrofitting and repair works at the central lubrication system may only be done by BEKA.
Guarantees and warranty for any damage at the central lubrication system caused by
improper lubricant (e.g. wear of piston, piston jamming, blockades, brittled sealings etc.) will
expire.
BEKA will generally not assume guaranty claims for any damage caused by lubricants,
although those have been laboratory tested and released by BEKA, as such damage (e.g. by
over-stored or incorrectly stored lubricants, batch fluctuations, etc.) cannot be verified or
reconstructed later.
Attention!
Attention!
Attention!
6
Subject to alterations!
...a product from
BAL2076_central lubrication pump_01
19EN
© BEKA
2019 All rights reserved