3.2.3
Central lubrication pump FKGGM - EP with installed MX-F distributor
Description corresponds to FKGGM-EP/EPR .
Additionally a distributor is directly installed at the pump.
Distributor MX-F
The progressive distributor MX-F consists of an initial-, middle, and end element and is directly attached to the
pump. The progressive distributor is designed for an operating pressure up to 300 bar. Due to the progressive
piston control of the distributor, a high operational safety is ensured.
Monitoring the distributor:
The progressive distributor MX-F can easily be monitored by means of a proximity switch due to ist hydraulic
piston control. The pistons are moved by incoming lubricant so that the metered lubricant flows out of the outlets
inevitably and at one outlet after the other. The proximity switch monitors the piston movement. The proximity
switch sends a signal to the control unit at each piston movement. If the signal is not send within an indicated
monitoring time, the connected control unit sends an error message.
Components:
Fig. 5 (example 2076 00118):
Ventilation
Reservoir
2,5 liter
Level label
BEKA
WIND
Filling nipple with
dust cap
Pump housing
Type plate of pump
Connection
Distributor combination
MXF 5/5
Pump element
PE-170
Greaser with
dust cap
Straight filling
connection
Motor housing
top with motor
Motor housing
bottom
Components FKGGM-EPR:
Fig. 6 (example 2076 00599):
Ventilation
Distributor combination
MXF 4/3
Overfill protection
Pump element
PE-170
Straight filling
connection
Motor housing
top with motor
Motor housing
bottom
level label
BEKA
WIND
Reservoir 4 Liter
Filling nipple with
dust cap
Level switch
Pump housing
Ventilation screw
Type plate of pump
Connection
15
Subject to alterations!
...a product from
BAL2076_central lubrication pump_01
19EN
© BEKA
2019 All rights reserved
