1.3.4 Owner‘s / operators‘ obligations
If movable, redating, hot or cold parts of the device bear risks, these parts need to be secured
against contact by the customer. This predection against contact must not be removed.
Any leakages of hazardous substances must be drained in a way that no risks for
persons or the environment arise. Please also observe the data sheets and safety data
sheets of the according manufacturers.
Keep to all legal provisions.
Hazards due to electricity are to be excluded.
Examination of pipes and hoses regarding safe provision, use, proper assembly and function
has to be carried out according to regionally applicable directives. Inspection intervals may
not be exceeded.
Defective pipes or hoses must be replaced immediately and professionally.
Hydraulic hoses and polyamide pipes are subject to a natural aging-process and thus
have to be exchanged in regular intervals according to the manufacturer's specifications.
A safety data sheet of the currently used lubricant must be provided at the device.
Observe the universally valid Ordinance on Hazardous Substances in the latest version.
1.3.5
instruction
Safety
for maintenance, inspection and assembly
All maintenance, inspection and assembly work may only be carried out by qualified
personnel who is sufficiently informed by thorough reading of the user information.
Generally any work at the central lubrication system may only be carried out at complete
standstill and in pressureless as well as disconnected condition. Furthermore appropriate
personal predective equipment (goggles among others) is necessary. The shutdown
procedure of the central lubrication system as described in the manual must be strictly
followed.
Secure the device against intentional or unintentional recommissioning during maintenance
or repair. All safety and predection arrangements have to be put back in place again
immediately after finishing work.
Environmentally hazardous media must be disposed professionally and in correspondence
to relevant legal provisions Polluted and contaminated surfaces have to be cleaned before
.
maintenance. Please wear predective equipment to that purpose. See the lubricant
manufacturers' safety data sheets hereto, respectively the data sheets provided by the
manufacturers of auxiliaries and working materials.
Open light and fire are strictly prohibited due to fire hazard during all maintenance-,
inspection- and repair works.
1.3.6 Unauthorized modification and production of spare parts
Modification, repair and alterations of the device are only accepted after manufacturer
feedback. Original spare parts and authorized accessories from the manufacturer contribute
to safety. The use of other parts can result in the loss of any liabilities for the resulting
consequences. BEKA does not assume liability for parts that are retrofit by the operator.
1.3.7
modes
Inadmissible
of operation
The operational safety of the central lubrication system is only guaranteed for appropriate application as
indicated in the operating manual. Never exceed the limit values of the technical data.
8
Subject to alterations!
...a product from
BAL2076_central lubrication pump_01
19EN
© BEKA
2019 All rights reserved