1
3
A
B
C
4–5
Operation (Computer) – 4
3.
Choose the
COMM
menu selection.
Complete the appropriate information on
the window for the relay to be addressed.
a. If communication is through a
modem, choose the Modem
command button to expand the
communications dialog box. Choose
the desired relay location and choose
Dial
button. This action establishes
contact and automatically opens the
communication to the relay.
b. If computer is serially connected
through the front port, choose the
Open COM
button. This action
establishes communications.
4.
Enter any valid IPScom command(s) as
desired.
5.
To end communication when
communicating by modem, choose the
Hang Up
command button from the
expanded Communication dialog box. To
close the communication channel when
connected locally, choose the
Close
COM
command button.
4.2
Operation
Activating Communications
After the relay has been set up, the modems
initialized, and IPScom installed, communication is
activated as follows:
1.
Choose the IPScom icon from the
Becoware folder.
2.
The IPScom splash screen is displayed
briefly, providing the software version
number and copyright information. This
information is also available by choosing
the
About
... command from the
Help
menu.
Summary of Contents for M-3520
