![background image](http://html.mh-extra.com/html/nivelco/nitime-jel-111/nitime-jel-111_user-manual_1696770001.webp)
Thank you for choosing a NIVELCO instrument.
We are sure that you will be satisfied throughout its use.
1. APPLICATION
NITIME
time relays are microprocessor controlled units suitable for highly diverse timing tasks. The multiple
functions, the universal power supply and (1-module width) the rail mountable construction ensure universal
usage (automation, lighting, heating, motor and ventilation control).
2. TECHNNICAL DATA
2.1
G
ENERAL DATA
TYPE
JEL-111
JEL-121
Number of functions
10
2
Adjustable time ranges
0.1 sec … 10 days
0.1 sec … 100 days
Time setting controls
rotary switch, potentiometer
Reset time
max. 150 msec
Time deviation
5% - mechanical setting
Repeat accuracy
0.2% - set value stability
Temperature coefficient
0.01% /
C at 20
C
Power supply
12-240V AC/DC
Power consumption
0.7-3 VA AC, 0.5-1.7 W DC
Output
Relay 1xSPDT
Rated current
16 A AC1
Inrush current
30 A (<3 sec)
Output indication
multifunctional LED
Switching voltage
250 V AC1 / 24 V DC
Switching power
4000 VA AC1, 384 W DC
Min. switching power
500 mW DC
Electrical lifespan (AC1)
0.7x10
5
switchings
Mechanical lifespan
3x10
7
switchings
Electrical connection
terminal for 2.5 mm
2
wire cross-section
Electrical protection
Class II. reinforced insulation
Mechanical connection
DIN EN60715 rail
Ingress protection
IP 20
Ambient temperature
-20
C … +55
C
Mass
90 g
70 g
2.2
A
CCESSORIES
–
User’s manual
–
Warranty Card
–
Declaration of Conformity
2.3 O
RDER CODE
NITIME J
E
L
– 1 1
Type
Code
Multifunction 1
Pulse cycler
2
2.4 D
IMENSIONS
45
67,
5
90
64
3,4
16
35
90
45
67,
5
17,6
14,8
5
3. INSTALLATION
NITIME
time relays can be mounted on DIN EN 60715 rails.
The device should not be installed in highly electromagnetic
environment. Operating temperature should not exceed the limit of the
specified operation temperature even in conditions such as increased
ambient temperature or continuous operation. The device is
completely electronic. Consider this during the installation.