manualshive.com logo in svg

BEAMEX MC6-T, Manual, Page: 87 / 172

Share
Download
BEAMEX MC6-T Manual Download Page 87

Calibrating Instruments - 87

Instrument List Window Menu

The Instrument List window's menu contains a lot of useful tools:
•

Create New

 for creating a new Instrument etc. (See 

Figure 76:

Instrument List Window's menu

)

•

Sort 

for sorting the list contents alphabetically etc. Sorting icons shown

in status bar (ascending / descending):

Identification

Due Date

Creation

•

Show

 to display all or filter to a selected group of items in the list. The

group can be, e.g. all calibrated instruments. When filtering is active, the
following icon is shown in the status bar: 

•

View Mode

 for defining whether the 

Plant Structure

 or 

Work Order

 list

is shown.

•

Browse

 to jump to start/end of list or finding instruments. When find is

in use, the following icon is shown in the status bar: 

•

Manage

 for deleting all Instruments/Results/Plant Structure levels and

also for moving/renaming Plant Structure levels.

Figure 76: Instrument List Window's menu

Warning: 

 Once an item is deleted, there is no way to retrieve it.

Summary of Contents for MC6-T













































































































































































Reviews:

No comments