BEAMEX MC6-T, Manual, Page: 102 / 172

102 - Documenting Calibrator
Target Field is the field in MC6-T, Value is the field and its value in the
connected device. Mapping Mode defines how the mapping is done.
•
Generic , gives you a list of protocol's common fields.
•
Text
, assigns a fixed text to the selected MC6-T field.
• DD Field , gives you a list of all fields etc. available in the device
model's Device Description. Note that this option is not available for the
Protocol Defaults , only for Device Model Defaults .
Note: It is possible to map the same transmitter field into
several MC6-T fields. In the Figure 94: Sample of default
mappings for HART protocol , device's Tag is mapped both to
Position ID
and
Device ID
in MC6-T's instrument data.
When adding or editing mapping, the target fields that are
already being used are disabled (gray).
When you change the mapping, it will be saved as the default
mapping for future use.
After changing the mapping, you need to read the data again
using the Get Mapped Data menu command.
You can remove a single mapping line by opening it and
touching the "Trash Can" icon.
Figure 95: Generic Fields when Mapping Mode is "Generic"