BEAMEX MC6-T, Manual, Page: 117 / 172

General - 117
Note:
Each communication protocol is a separate option in
MC6-T, therefore all protocols are not necessarily enabled in
your MC6-T.
This manual is not an introduction to HART and Fieldbus
instruments. Get the know-how and terminology from books
dedicated to HART and Fieldbus instruments and technology.
The Communicator's user interface may include text in another
language than what MC6-T's user interface language setting is.
This happens when the language of the instrument's fields etc.
differ from MC6-T's.
Communication may also be started from the following main functions in
MC6-T:
•
Calibrator ,
• Documenting Calibrator and
•
Data Logger
Depending on active/inactive options, some communication protocols may
be disabled (grayed).
Figure 113: Selecting a communication protocol in Calibrator,
Documenting Calibrator and Data Logger
MC6-T's Communicator is primarily meant for viewing and editing the
configuration of Digital Communication Instruments. However, when
invoking communication from Calibrator , Documenting Calibrator or
Data Logger , you most likely plan to select a Variable or Parameter
(e.g. Primary Value) for calibration or data logging instead of doing
full configuration for the instrument. MC6-T, of course, supports this
functionality too.
See also chapter
HART Device Description Specifics .