BEAMEX MC6-T, Manual, Page: 127 / 172

About Instrument Parameters - 127
Figure 122: Documenting Calibrator menu with HART instrument
connected
When trimming, refer to the instrument's user manual to locate and start
a trimming method, either for the analog or the digital signal / sensor.
When the method is located follow its instructions. At some point during
the method, you need to apply an applicable input signal. See Figure 123:
Sensor trim method .
• If the trimming procedure was invoked from Documenting Calibrator, the
lower part of the window has areas were the instrument's input (1) and
possibly also the output (2) readings are shown. Use the input signal
area to check what the correct reading is.
• If the trimming procedure was invoked from another MC6-T main
function, e.g. Communicator, tap on either of the areas reserved for
calibrator readings and select a suitable Quantity for measurement.