Bayer HealthCare Rapidlab 800, Operator'S Manual

Page: 159 / 699

You can print calibration data and send the data to an LIS or a data management
system. You cannot edit calibration data.
1. Access the Recall Calibration Data screen from the Menu screen:
a. Select and press .
b. Select and press .
2. Select a calibration type and press .
3. Type the search criteria and press .
The Calibration Date fields contain the current day’s date. If you do
not complete any other fields, the system recalls all one-point calibrations for
this day.
for a selected date type the date in both Calibration Date fields.
from the earliest date to a
specific date leave the Calibration Date From field blank and type
the specific date in the Calibration Date To field.
from a specific date to the
present date type the start date in the Calibration Date From field
and leave the Calibration Date To field blank.
by shift or any other
specific time period type the start time in the Calibration Time From field
and type the end time in the Calibration Time To
field.
4. Press .
more than one calibration
is found the Calibration Data Search Log screen appears as
shown in Figure 2-34. Continue with step 5.
one calibration is found the Calibration Data Search Result screen appears, as
shown in Figure 2-35. Continue with step 6.