Bayer HealthCare Rapidlab 800, Operator'S Manual

Page: 145 / 699

5. Select the report that you want to view and press .
The QC Data Search Result screen appears.
!#" !
6. Use this screen to edit, print, or transmit QC reports; to view and print
Levey-Jennings Charts; and to print statistical summary reports. When a
CO-ox module is attached, you press
to display the CO-ox
parameters.
7. Press .
more than one
sample is found the Done Options message box appears:
Select Next Record and press to view the next
report that appears on the log.
Select Previous Record and press to view the
previous report that appears on the log.
Select Search Criteria Screen and press to view the
QC Data Search Criteria screen.
Press to close this message box.
one sample is
found the QC Data Search Criteria screen appears as shown in
Figure 2-25.
8. Press to return to the Ready screen.
If no QC sample results are recalled, the No QC Data message box appears. Press
OK to return to the QC Data Search Criteria screen.
If the selected sample has a D code or status message associated with it, the View
Diagnostics F-key appears. Press View Diagnostics to view the Diagnostics
message box. Scroll through the D codes and messages. Press Cancel when you
finish.
!