4. Operating
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
4-10
/e:<event>
Open video window that will be closed and the video software will
be exited when
<event>
is sent. The same event may be associ-
ated with multiple video windows.
/k:<event>
Exit all videos started with option
/e:<event>
/t:<title>
Set video window title. Default is the name of the video channel.
/b[:[<alpha>][;<quality>]]]
Enables the usage of the transparency slider on the scaler settings
dialog.
alpha
sets the transparency in a range of 0 .. 255.
quality
sets the Pre-Scaling factor in a range of 0 ..14
/w:[[v]<width>[,<height>]]
ª
[@<x>,<y>]
Sets size and position of video window. Mentioning just
width
and
height
sets the dimensions of the complete window. By using
v
,
the dimensions refer only to the video (window borders require
extra space).
v
should not be used when combining
/w
with
/f
.
@
determines the upper left position of the window.
/a:s|d|m
Set aspect ratio of video window to
source
,
display
or
manual
unless specified with
/w:
.
/i:<source>
Select the source.
/o:b|m
Sets the frame rate to
bandwidth
25/30 fps or
motion
50/60 fps.
/r:<reduction>
Sets the dynamic reduction factor of the frame rate of the D
UAL
RGB
I
NPUT
C
ARD
/p:<preset>
applied to RGB channels: Selects an RGB preset (Autodetect is 0).
/p:<StreamName>[,
<StreamParm>=<Value>[,...]]
applied to streaming video channels: Selects the specified stream.
Parameters differing from the original stream definition can be
added; if a complete set of parameters is added the streamname
can be omitted. The following parameters are available. The values
are set according to the description in section
of Streaming Video Card SVC-1 and SVC-2
.
DstIPAddr
DstPort
DstIPProt
StreamProt
ProgramID
SkipStart
SkipEnd
unicast
,
broadcast
or
<nnn.nnn.nnn.nnn>
, see
IP
Address
see
Port
udp
,
rtp
, see
IP Protocol
auto, elementary, program, transport
, see
Stream
Protocol
see
PID
see
Skip byte at Start
see
Skip byte at Start
SrcIPAddr
SrcPort
SrcIPProt
StartString
see
IP Address
of the encoder
see
Port
number of the encoder
see
IP Protocol
for encoder communication
see
Startstring
to send to encoder for stream start
/4
/16
Specify format of video source (
4:3
,
16:9
)
Default is
/4
(4:3)
/c
Disable preset cache in the video dialog box (Input).
/f
Display video without a window (title bar, borders). Setting aspect
ratio to
source
or to
display
preserves the aspect ratio of the
video, setting aspect ratio to
manual
keeps the size of the display.
/k
Disable keyboard shortcuts
/m
To be used if orbiting is enabled
/p
Disable video dialog box
/s:<value>
Specify the overscan value:
values ranging from 0 to 1000 corresponding to 0% to 10% over-
scan on each border of the image.
/t
Make video window a topmost window
Table 4-4
Options of video.exe