Barco TransForm A, User Manual

Page: 106 / 202

4. Operating
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
4-26
Encoder
manufacturer – type
compression
algorythm IP
protocol Skip bytes
at start Skip bytes
at end Stream
protocol TCP PID
207 / 207W / 210 /
210A / 211 / 211A /
213 PTZ / 214 PTZ /
216FD / 225FD / 231D /
231D+ / 232D / 232D+ /
241S / 241SA / 242S IV Startstring example:
Axis241Q://GET /axis-cgi/mjpg/
ª
video.cgi HTTP/1.0\n\n
221 Startstring example:
Axis241Q://GET /axis-cgi/mjpg/
ª
video.cgi HTTP/1.0\n\n
Up to 30 frames/sec
240Q Startstring example:
Axis241Q://GET /axis-cgi/mjpg/
ª
video.cgi?camera=1 HTTP/1.0\n\n
241Q / 241QA Startstring example:
Axis241Q://GET /axis-cgi/mjpg/
ª
video.cgi?camera=1 HTTP/1.0\n\n
A maximum use of 4 4CIF streams with a maximum quality of 75% (or at
least 25% compression) is recommended.
Barco – TransForm SCN scn UDP 0 0 auto OFF 0
h263 RTP 0 0 auto ON 0 BOSCH – NWC-0455 Dinion /
NWC-0455 DinionXF /
VideoJet8008 / VIP X1 /
VIP X1600 / VIP X2
No on-board RCP+ support; I-frame distance may not be 0.
Startstring example:
VIP X
h263 RTP 0 0 auto OFF 0 BOSCH – Videojet 10 / Video-
jet 1000 / Videojet Xpro /
VIP 10 / VIP 1000
No on-board RCP+ support; I-frame distance may not be 0.
mpeg2 RTP 4 0 auto OFF 0 BOSCH – Videojet 1000 / Video-
jet 8000 / Videojet Xpro /
VIP 1000
No on-board RCP+ support.
Cieffe – NETTUNO mpeg4 UDP 0 0 auto OFF 0
Coretec – VCX-2400-E mpeg2 UDP 0 0 auto OFF 0
Cornet –
iVDO Streamer 2/4 Encoder
mpeg2 UDP 0 0 auto OFF 0
Cornet –
iVDO Streamer 2/4 Encoder
mpeg4 RTP 0 0 auto OFF 0
DVTeL – 7601e mpeg4 RTP 0 0 auto ON 0
Use port 3000 for TCP,
Startstring example:
SmartSight
Exterity – A/V server mpeg2 RTP/UDP 0 /4 0 auto OFF 0
IP protocol: for Transport/UDP = UDP
for
Transport/RTP and Elementary = RTP
SkipAtStart: for Elementary = 4, else = 0
2D wavelet UDP 0 0 auto ON 0 GE Security (Visiowave) –
Discovery 2400 /
Discovery 300 (Visiobox) /
Evolution HD
Use the encoder TCP port for TCP,
Startstring example:
Visiobox
Signaling method is TCP, signaling is supported.
HaiVision – Hai210 mpeg2 UDP 0 0 auto OFF 0
mpeg4 RTP 0 0 auto OFF 0 Hi Tron – e-Videoserver
No usage of Advanced simple profile.
Encoder must be set to “Send to (Client) IP”