6. Advanced configuration
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
6-43
Output channels
indicates the configuration and assignment of the channels of the graphic cards and O
MNI
-
S
CALERS
according to the appearance of the data on the display wall. The names of the entries indicate the posi-
tion on the display wall, where this graphic channel is displayed (please refer to the table below). If O
MNI
S
CALERS
are used, then there is also a subentry available that shows the properties of the respective O
MNI
S
CALER
channel.
Entry
meaning
Graphic card
Row
Position on the display wall where the graphic channel is displayed:
Row:
counted from top to bottom, counting starts with 0.
-1 is used, if the channel is not connected to the display wall.
Column
Column: counted from left to right, counting starts with 0.
-1 is used, if the channel is not connected to the display wall.
GX_BoardType
Identifies the type of the graphic card by the first four digits of the ident num-
ber.
GX_BPIndex
Index of the O
MNI
B
US
; counting starts with 1.
(only in an OmniBus conf.)
GX_ConnectorPos
PCI slot used for this card, counting starts with 0.
GX_DevIndex
OmniBus configuration: Index of the graphic channel within one O
MNI
B
US
Processor configuration: Index of the graphic channel system-wide.
Counting starts with 0.
O
MNI
S
CALER
BS_BoardType
Identifies the type of the O
MNI
S
CALER
by the first four digits of the ident number.
BS_BPIndex
Index of the O
MNI
B
US
; counting starts with 1.
(only in an OmniBus conf.)
BS_ConnectorPos
PCI slot used for this card, counting starts with 0.
BS_DevIndex
OmniBus configuration: Index of the channel within one O
MNI
B
US
Processor configuration: Index of the channel system-wide.
Counting starts with 0.
Table 6-27
DEX - entries of output channels
Input channels
lists all input channels available on the system without considering whether there is a signal
applied or not. Per D
UAL
DVI
I
NPUT
C
ARD
and D
UAL
RGB
I
NPUT
C
ARD
there are two channels considered, for the other
input cards there are 4 channels considered. The table below shows the entries available with an input channel
and its meaning:
Entry
meaning
B_BoardType
Identifies the type of the base board of the input card by the first four digits of
the ident number.
M_BoardType
Identifies the type of the mezzanine board of the input card by the first four
digits of the ident number.
BPIndex
Index of the O
MNI
B
US
; counting starts with 1.
(only in an OmniBus conf.)
Connector Position
PCI slot used for this card, counting starts with 0.
DevIndex
OmniBus configuration: Index of the input channel within one O
MNI
B
US
Processor configuration: Index of the input channel system-wide.
One input card may provide multiple input channels depending on their type;
counting starts with 0.
Name
Name of the input channel, default names are
\\frgX
where
X
is 0, 1, …
Status
Status of the input channel, possible values are:
in use
/
free
Bandwidth
Bandwidth that the input data currently requires on the PCI bus in Bytes/s
Table 6-28
DEX - entries of input channels
