![background image](http://html1.mh-extra.com/html/barco/transform-a/transform-a_user-manual_3826173153.webp)
6. Advanced configuration
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
6-26
Boot.ini
With
AGS-3390-1/-2
the boot.ini has to be adapted. By default the file is located directly on drive c:
C:\boot.ini
Being a system file it is usually not shown in Windows Explorer. Therefore change the settings of Windows Ex-
plorer accordingly (
Tools
->
Folder Options
->
View
->
Hidden Files and Folder
-> select
Show hidden files
and folders
and not selected
Hide protected operating system files
). The file is also by default write pro-
tected. After a right click on the file select properties from the drop down menu and make sure that read-only is
not selected. Then open the file with an editor and look for a line starting with
multi(0)disk(0)rdisk(0)partition(1)
. Make sure that
/NOPAE
is added to the list and that
/NoExecute
has the parameter
AlwaysOff
which then reads as
/NoExecute=AlwaysOff
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
ª
/NOPAE /NoExecute=AlwaysOff
Graphic driver
Now the display drivers must be installed. Proceed as explained in section
3.5.1 Installing the display driver and
Update of network card driver
Insert the CD T
RANS
F
ORM
A Suite into the CD-ROM drive and setup the driver of the network adapter by means of a
driver update in the device manager. Therefore open the device manager (
Start -> Settings -> Control Panel ->
System -> Hardware
Tab
-> Device Manger ...
). Here you can select the suitable driver from the T
RANS
F
ORM
A
Suite. For this purpose there is an overview on the T
RANS
F
ORM
A Suite, about which driver should be selected
depending on the network card and the used operating system.
Windows service pack
Install the suitable recommended service pack, please refer to section
. Take care to install the
service pack in the same language, like your Windows installation. The service pack for Windows 2000 can be
found in the directory:
<CDROM>:\3rd party\Windows 2000 SP4\
The service packs for Windows XP are part of the Windows XP system CDs.
Optimizing mouse cursor for TransForm A system
For the optimal display of the mouse pointer when moved on video windows, deactivate the pointer shadow
(
Start -> Settings -> Control Panel -> Mouse -> Pointers
Tab
-> Enable pointer shadow
), please refer also to
section
3.6.1 Appropriate cursor for video applications
for further information on software and hardware cursor.