4. Operating
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
4-22
Configuring Streaming Video Card SVC-1 and SVC-2
For each S
TREAMING
V
IDEO
C
ARD
SVC-1 and SVC-2 once the configuration parameters must be entered into the
Board
Settings
dialog, therefore select
Board Settings
from the
Options
menu.
Figure 4-8
Board Settings dialog of the S
TREAMING
V
IDEO
C
ARD
SVC-1 or SVC-2
IP Configuration
Address
IP address of the S
TREAMING
V
IDEO
C
ARD
SVC-1 and SVC-2.
Each S
TREAMING
V
IDEO
C
ARD
SVC-1 and SVC-2 needs its own, fixed IP address
Netmask
Netmask of the S
TREAMING
V
IDEO
C
ARD
SVC-1 and SVC-2, must be the same value for all
cards
Gateway
Gateway must be the same value for all cards. Even if the network does not require
an indication of the Gateway, a value must be filled in.
Decoder Configuration
Algorithm
List of the supported decoder algorithms.
For S
TREAMING
V
IDEO
C
ARD
SVC-1: All video streams processed by one card must have the
same compression algorithm.
Possible algorithms are:
h263
,
mjpeg
,
mpeg2
,
mpeg4_sp
,
mxpeg
,
scn_dec
,
visiowave
,
vnc
.
For S
TREAMING
V
IDEO
C
ARD
SVC-2 the decoder algorithm is determined per stream. Please
refer to
Streaming Video Card SVC-2
below. The selectable entries
mpeg2
,
mpeg4
,
visiowave
of the Algorithm field are of no effect.
Table 4-10
When assigning a stream to a Streaming Video Card SVC-1, which has a different decoder
algorithm than the one displayed before, the order in which the configuration changes are
done, must be considered:
•
First select the suitable decoder algorithm in the Board Settings dialog.
•
Then adjust the stream parameters and display it.
