3. Getting started
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
3-42
Normal system start
The Windows operating system starts automatically. Please, refer to section
The system is pre-configured at the factory with an administrator account and a password.
User name
administrator
Password
barco
Table 3-5
3.3.3
Switching off
Always shut down the Windows operating system, before switching off your TransForm A.
Click the
Start
button on the taskbar and choose
Shut Down …
to display the
Shut down Windows
dialog box:
Figure 3-50
shut down dialog for Windows 2000/XP
Select
Shut down
and click
OK
. After some seconds a message appears that you can switch off your computer
safely. Simply press the
power
button
on the front of P
ROCESSOR
.
If TransForm A is switched off as explained above, not all parts are disconnected from the
power supply. To disconnect the whole device the power switches of all OmniBus devices,
Extender and Processor must be switched off and all power plugs of the devices have to be
pulled out after switching off.
