3. Getting started
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
3-17
3.2.5
Graphic cards
The DDC capable UGX G
RAPHIC
C
ARDS
provide the facility for connecting Barco projection modules (digital mode) or
for connecting CRT monitors or projectors (analog mode) to T
RANS
F
ORM
A. By means of a rotary switch on the
boards it can easily be switched to the appropriate mode. For digital output, resolutions up to 1920x1200 can be
processed.
For T
RANS
F
ORM
A systems with digital output and video or RGB insertions the output of the graphic cards is led
over to O
MNI
S
CALERS
and then connected to the display device. Please refer to section
Connectors
The UGX
G
RAPHIC
C
ARD
provides two Dual-DVI connectors to connect four display devices.
port 0/1 out
port 2/3 out
LED port 2/3
Figure 3-20
Ports of UGX
G
RAPHIC
C
ARD
DDC capable display devices must be connected to the graphic cards before TransForm A is
switched on. If they are connected afterwards, TransForm A will not be able to detect them!
Specifications
For detailed technical specifications of the graphic cards please refer to section
.
