![background image](http://html1.mh-extra.com/html/barco/transform-a/transform-a_user-manual_3826173117.webp)
4. Operating
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
4-37
Detect Position
Detects automatically the visible portion of the signal and positions it in the video window.
If selected this applies each time the signal changes or gets reconnected.
Only applicable with D
UAL
RGB
I
NPUT
C
ARD
with controlware CTW-3010-02 or later.
Edit Preset
Edit the preset.
New Preset
Create new preset.
Table 4-17
Video dialog box – D
UAL
RGB
I
NPUT
C
ARD
When starting to display an analog RGB-source or an analog YUV source the settings of the source are automati-
cally detected as long as the default setting
Detect Position
remains on and
Auto
is selected in the
Presets
list.
The D
UAL
RGB
I
NPUT
C
ARD
and the D
UAL
DVI
I
NPUT
C
ARD
perform complete auto detection of the screen mode as well
as of the position. In most cases this results in settings to optimally display the RGB or YUV data. If anyhow auto
detection sets a preset with e.g. a different resolution, then, if you know the timing of the incoming signal, se-
lect this timing from the preset list, the video software will position the source in respect of the newly selected
timing.
Depending on the version of the controlware of the D
UAL
RGB
I
NPUT
C
ARD
, auto detection might behave slightly
different to the given description, which is based on version 3010-02. Please, refer in this case to section
Configuration of analog RGB and YUV input
To check the version of the controlware you can use the device explorer, please refer to section
.