4. Operating
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 16 – August 2007
____________________________________________________________
4-32
4.3.7
Displaying sources of Quad SDI Input Card
With a right click on the window of digital video the control panel for this type of video can be opened.
Figure 4-15
Q
UAD
SDI
V
IDEO
C
ARD
– dialog box
Setting of contrast
Setting of brightness
Setting of saturation
Hue
not applicable
Format
Source
Switch to native aspect ratio of source
Display
Switch to native aspect ratio of projection module
Manual
Resize x and y independently
Overscan
The edges of video often show disturbances; therefore an overscan of some % can be defined
that will not be displayed.
Values between 0% and 10% are possible
Default: 3%
16:9
Switch to 16:9 aspect ratio. Not applicable, if the Format
Manual
is selected.
Fullscreen
Scale the video up to the whole display wall or in
Channel Video
mode to the projection
cubes, which currently display a part of it.
Freeze / return to play (if the source is frozen, none of the displaying settings can be changed
and the Scaler settings dialog cannot be opened)
Source
0 (Disabled)
Video channel disabled
1 (SDI)
Enable SDI video signal
Frame Rate
Setting of the used frame rate, default is 25/30 fps depending on the video standard, in addi-
tion 50/60 fps are selectable.
Standard
Displays the detected video standard.
Possible standards:
PAL
,
NTSC
Noise Reduction
not applicable
Deinterlace
not applicable
Table 4-15
Video dialog box – Q
UAD
SDI
V
IDEO
C
ARD
