background image

Dell™ Inspiron™ N4010 Service Manual 

 

 

Notes, Cautions, and Warnings 

Information in this document is subject to change without notice. 

© 2010 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, and 

Inspiron

 are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell 

under license; 

Microsoft,

 

Windows

Windows Vista

, and the 

Windows Vista

 start button logo are either trademarks or registered trademarks of Microsoft Corporation in the United 

States and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Regulatory model P11G series     Regulatory type P11G001

 

March 2010                                Rev. A00

 

Before You Begin

 

Battery

  

Module Cover

  

Memory Module(s)

  

Optical Drive

  

Keyboard

 

Palm Rest 

 

Power Button Board

  

Coin-Cell Battery

  

Wireless Mini-Card(s)

  

Internal Card With Bluetooth

® 

Wireless Technology 

 

Thermal Fan

  

System Board

  

Hard Drive

  

Thermal Cooling Assembly

  

Processor Module

  

Speakers 

 

Display

  

Camera Module

  

Middle Cover

  

I/O Board

  

Daughter Board

  

AC Adapter Connector

  

Flashing the BIOS

  

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

CAUTION: 

A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

WARNING: 

A WARNING indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Inspiron N4010






















































Reviews: