Barco SIM 5W User Manual Download Page 154

Page: 154 / 195

7. Advanced

Field

/adjustment

Description

Notes

Planes

Allows to select the type of soft edges :

- internal soft edge

- Alpha-Beta planes

Edges

It is possible to select one or more of the 4 edges of the
image:

Left/Top/Right/Bottom

A Disabled edge is a hard edge. Adjusting a
hard edge results in a blanking adjustment.
See blanking

Source

The background image on which the soft edge adjustment
is applied can be the source or a full white image (pattern)

The procedures in this manual are explained
using a full white background

Adjustment guide

An adjustment guide consisting of a 4 brightness graduated
bars can be applied on the background image during the
soft edge adjustment

Hierarchy level

Allows to select the level of the adjustment.

Reset

The soft edge shape is set to default settings.

Soft edge shape follows geometry settings,
the shape of the soft edge is set to 12.5%,
enabled edges stay enabled, disabled edges
stay disabled

Table 7-7
dialog box legend

7.9.9.4.2

The soft edge edit modes

The Edit Modes

•

Select mode : allows to select the desired point using the

←

and

→

arrows or to select the desired level or edge using the

↓

and

↑

arrows.

•

Adjust mode : allows to perform the correction (in real time) using the arrows.

•

Edit mode : allows to select the desired control (edit box, ...) in the dialog box.

•

Change mode : allows to change the values in the edit boxes of the dialog box.

Image 7-178

Image 7-179

150

R59770324 SIM 5W 22/12/2011

Downloaded From projector-manual.com Barco Manuals

Summary of Contents for SIM 5W




































































































































































































Search results

Summary of Contents for SIM 5W

Reviews:

Related manuals for SIM 5W

Brands by name

Popular brands

Barco SIM 5W, User Manual

Search results

Summary of Contents for SIM 5W

Reviews:

Related manuals for SIM 5W

Brands by name

Popular brands