Barco SIM 5W User Manual Download Page 77

Page: 77 / 195

7. Advanced

7.5.2

Load

When to load a

le ?

In some cases the user wants a particular

le to be used for the display of a particular source. In this case the user should load the

desired

le from the image

les menu. The load

le option will allow the user to choose between several

les corresponding more

or less to the active source speci

cations.

In normal operation the

le selection (load) will be done automatically by Auto Image.

How to load a

le ?

1. Press

MENU

to activate the Tool bar

2. Press

→

to select the

Image

les

item

3. Press

↓

to Pull down the

Image

les

4. Use

↑

↓

to select

Load

Image 7-39

5. Press

ENTER

A dialog box is displayed

Image 7-40

6. Use

↑

↓

to select the desired

Tip:

For more information (speci

cations) on the image

les see the Appendix section

7. Press

ENTER

The

le is loaded and the image is adapted.

What to do if the image is not perfect ?

If the displayed image is not correct after Auto Image or after selecting the best

tting

le, go to the Edit menu, select the active

and change the settings.

R59770324 SIM 5W 22/12/2011

Downloaded From projector-manual.com Barco Manuals

Summary of Contents for SIM 5W




































































































































































































Search results

Summary of Contents for SIM 5W

Reviews:

Related manuals for SIM 5W

Brands by name

Popular brands

Barco SIM 5W, User Manual

Search results

Summary of Contents for SIM 5W

Reviews:

Related manuals for SIM 5W

Brands by name

Popular brands